Product Details:
Payment & Shipping Terms:
|
Material: | Carbon Steel | Usage: | Sewage Treatment |
---|---|---|---|
High Light: | 30t/h reverse osmosis water purification system,5.5kw reverse osmosis water purification system,30t/h home water recycling system |
2 industrial water filter
FA integrated water purifier is one of the series of products developed by our company on the basis of summing up various previous water purifiers. The equipment is mainly composed of two parts, inclined pipe sedimentation and valveless filter. The processing water volume is 10, 30, 50, 100, 125, 150, 200 tons/hour and other different models (The specific treatment water volume can be adjusted according to the needs of the owner) .
This series of water purification devices integrates flocculation, sedimentation, sewage, water collection, filtration and other processes. It adopts siphon backwashing mode and can achieve a series of fully automatic operation of monomers without human operation. It is an important water purification unit to realize automatic management of water plants. Equipped with automatic dosing devices and disinfection equipment, it can become a water purification station (factory) with a full set of functions. This series of water purification devices not only have a wide range of applications, good treatment effects, and excellent water quality, but also have low self-consumption,low power consumption and small footprint. Save water, electricity, labor, save auxiliary pump and civil construction.
Size Table
Model | FA-10 | FA-30 | FA-50 | FA-100 | FA-125 | FA-150 |
Length | 2100 | 2500 | 4000 | 6800 | 8500 | 10200 |
Width | 1700 | 3850 | 3850 | 4600 | 4600 | 4600 |
Height | 4350 | 4350 | 4350 | 4350 | 4350 | 4350 |
Note: 1. All the parameter unit in this table is mm(millimeter).
2.FA-200=2 2.FA-200=2×FA-100, FA-300=2×FA-150, others can be deduced by analogy.
3.The size of this water purifier is conventional design size, special design can be made if special size is needed.
Design parameters
Inlet water pressure |
≥0.06Mpa |
Design surface load of sedimentation zone |
5~8m³/m2.h |
Applicable raw water temperature |
5~40℃ |
Design filter speed of filter area |
8~10m/h |
Suspended substance content limit of inlet water |
≤3000mg/L |
Filter washing intensity (water washing) |
10~15L/m2.s(T≈5min, adjustable) |
Suspended substance content in purified outlet water |
≤3mg/L |
Filter washing intensity (air washing) |
10~15L/m2.s(T≈5min, adjustable) |
Total retention time |
50~55min |
Filter material (quartz sand) |
Particle size 0.6-1.2mm, pile thick 1000-1400mm |
List of corollary equipment
Model |
Water production(t/h) |
Inlet water pipe(mm) |
Produced water pipe(mm) |
Water discharge pipe (mm) |
Sludge discharge pipe(mm) |
Pump (Feed water) |
Pump power(KW) |
Equipment weight(T) |
Operating weight(T) |
FA-10 | 10 | DN50 | DN80 | DN200 | DN150 | IS50-32-125A | 2.2 | 7.5 | 24 |
FA-30 | 30 | DN80 | DN125 | DN300 | DN150 | IS80-65-125A | 5.5 | 12 | 50 |
FA-50 | 50 | DN125 | DN150 | 2×DN300 | 2×DN150 | IS80-65-125A | 5.5 | 22 | 85 |
FA-100 | 100 | DN150 | DN200 | 4×DN300 | 3×DN150 | IS150-125-250C | 11 | 42 | 165 |
FA-125 | 125 | DN150 | DN200 | 5×DN300 | 4×DN150 | IS150-125-200B | 15 | 53 | 215 |
FA-150 | 150 | DN200 | DN250 | 6×DN300 | 4×DN150 | IS150-125-200A | 15 | 66 | 255 |
FA-200 | 200 | DN250 | DN300 | 8×DN300 | 5×DN150 | IS200-200-250C | 22 | 78 | 315 |
FA-300 | 300 | 2×DN150 | 2×DN200 | 12×DN300 | 8×DN150 | IS150-125-200C | 22 | 118 | 468 |
1
1 The d
Contact Person: xyh
Tel: 08618036076322
Fax: 86-510-68667866